The Arduino Duemilanove is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
Size:75x54x15 mm
Weight:25 gram
Arduino Duemilanove Prototype Shield (Compatible)
Arduino I/O Shield (Compatible)
Arduino LCD Shield (Compatible)
Arduino Motor Shield (Compatible)
Arduino Ethernet Shield (Compatible)
| Microcontroller | ATmega328 |
| Operating Voltage | 5V |
| Input Voltage(recommended) | 7-12V |
| Input Voltage (limits) | 6-20V |
| Digital I/O Pins | 14 (of which 6 provide PWM output) |
| Analog Input Pins | 6 |
| DC Current per I/O Pin | 40 mA |
| DC Current for 3.3V Pin | 50 mA |
| Flash Memory | 32 KB of which 2KB used by bootloader |
| SRAM | 2 KB |
| EEPROM | 1 KB |
| Clock Speed | 16 MHz |
Package Content:
1x Arduino Duemilanove ATmega328 Microcontroller Board
1x USB 2.0 Cable
1x 9v Power cable
Your cart is empty
![Arduino Robot Platform 4WD Chassiss Robotics Kit [Ready to Run]](bmz_cache/4/44a01d29743268afaebc1f4897bc0d33.image.150x131.jpg "Arduino Robot Platform 4WD Chassiss Robotics Kit [Ready to Run]")
![Arduino 6 DOF Programmable Clamp Robot Arm Kit [Ready to Use]](bmz_cache/8/83dc77285382f59aa387ddab4a02d093.image.150x124.jpg "Arduino 6 DOF Programmable Clamp Robot Arm Kit [Ready to Use]")
