SiteLock Positive SSL Certificate Authority

Ship to Worldwide

Your cart is empty

Arduino 6 DOF Programmable Clamp Robot Arm Kit [Ready to Use]

  • Model: bzb8780201
  • Shipping Weight: 1000g
  • 34 Units in Stock
Add to Cart:

Robotic arm that everyone is familiar, the hospital's surgical robot, the factory in the industrial manipulator, even though you've seen on TV or in the field, but its large body and high price, so that we stay away, and now We developed a small low-cost 6 Degrees of Freedom Robotic Arm, we can fulfill the dream of a robot to play!

Gripper Specification
Size: 65mm x 60mm x 27mm
Maximum size of mouth opening: 40mm
Maximum size of mouth with pads: 34mm

Robotic Arm Specification
Voltage: 4.8V-6.8V
Max Current: >5000mA
Arm Height: 320mm
Weight: 600g

Package Content
1x LG-NS Gripper
3x U shape brackets
4x Multifunction brackets
1x L shape bracket
3x Bearing
1x 180° Advance Rotation Base
2x Hitec 311 servo
1x DF05BB high torque Servo
1x DF15MG high torque Servo
3x Bearing Cup
1x Screw sets
1x USB SSC32 Servo Controller
1x USB cable
1x 9V Power Cable
1x Debugging software(beta)
1x Batteries Carrier

Base rotation, single plane shoulder, elbow, wrist motion, a functional gripper, and delivers fast, accurate, and repeatable movement.

USB SSC32 Servo Controller Specification:
This product is a USB interface, no serial port to facilitate desktop and laptop use.
USB port to upgrade the firmware functions to provide convenient and quick.
Interface: USB/TTL(baud rate 2400/9600/38400/115200bps)
Size: 58.5mm x 76.2mm
Resolution: 1uS 0.09°,1uS/second, 0.09°/second
Servo range: 180°and 360°
Controls Servo: Up to 32 servo motors(PWM/TTL)
Compatible lynxmotion RIOS Arm Control and SEQ Visual Sequencer software...etc
Provides 4 analog / digital signal input terminal, can be set at rest or latch.
Bluetooth module and APC220 provides wireless data transmission interface for remote control.
Provide ISP download port, for use of development.
baud rate using the two DIP switch settings, to avoid the jumper is not stability.
Support for Futaba, Hitec and most common Servo.
Supply Voltage: 6V - 12V or USB power (with self-recovery fuse, easy to use for debugging)
Servo Supply Voltage: 4.8V - 7.2V
Withstand current: each side 10A, 32 Road, the maximum 20A

Lynx SSC-32 Terminal
USB-SSC32 Command Formatting
Lynx SSC32 USB Driver